TAP Services(865) 919-6674

TAP Services

26102-11 Electrical Safety

1. OSHA CFR 1910 is the standard for ________.

Question 1 of 20

2. A live-dead-live test is conducted in order to ________.

Question 2 of 20

3. 8. NEC Section 590.6(A) states that the receptacle outlets requiring GFCI protection include the 125V, single-phase, 15A, 20A, and ________.

Question 3 of 20

4. OSHA safety standards for the construction industry are contained in ________.

Question 4 of 20

5. What must happen before any work may be performed in a confined space?

Question 5 of 20

6. The normal beating of a heart can be upset by an electrical current as small as ________.

Question 6 of 20

7. For safety, assume that any facility constructed before 1980 contains ________.

Question 7 of 20

8. OSHA requires you to be evaluated by a physician to ensure that you are physically fit to use which of the following types of protective equipment?

Question 8 of 20

9. When a guardrail cannot be attached to a building, a solution may be to install a(n) ________.

Question 9 of 20

10. Class 1 rubber gloves have a maximum AC use voltage of ________.

Question 10 of 20

11. Which of the following voltages is considered low voltage?

Question 11 of 20

12. Which of the following should have side rails that extend 36 inches above the top support point?

Question 12 of 20

13. Which of the following battery byproducts can be explosive when mixed with air?

Question 13 of 20

14. NFPA 70E® provides practical guidance in ________.

Question 14 of 20

15. What color tags are on the rubber gloves with the highest level of protection?

Question 15 of 20

16. The OSHA lockout/tagout rule protects workers from ________.

Question 16 of 20

17. Insulating gloves must be inspected by the user ________.

Question 17 of 20

18. Which factor determines the outcome of an electrical shock?

Question 18 of 20

19. At the end of the shift, a confined space entry permit must be ________.

Question 19 of 20

20. Under strict safety guidelines, which of the following should be used to discharge capacitors before working on de-energized circuits?

Question 20 of 20


 

Our Clients
Mailing List

Sign up for our mailing list today!

FOLLOW US ON SOCIAL MEDIA
 
 
 
 
3d person on book
Quick Nav
TAP Services
(865) 919-6674 phone Contact Us

This site is proudly hosted and designed by Globotech Solutions. All content Copyright © 2025, TAP Services.